Single Product Information


We'll never share your email with anyone else.


What it is made up from:

› See our levels of product page

Description and applications:

The Original snake has no straps pre-attached, but we recommend straps to be used, so that our product can be Re-Moved, Re-used.  This is the most economical product in our product line.  The product is spiral wrapped around the pipe  down the length of the pipe or around the valve or vessel that you are insulating.  You can also use this product folding it around the pipe, down the length of the pipe, hot dog bun style. It comes in different widths, so as to accommodate the different pipe sizes , valve sizes or vessel sizes.

Typical applications: 

  • Spiral wound over pipe , flanges, valves, either separately, or all together. 
  • We recommend the use of Straps , so that it will be Removable, and Re-Usable.  Use our straps for ease of installation and removal if required.  Use of other products such as tape, may compromise our product. 
  • Compliments heat tracing.  Temperature is good to 202˚F/ or 96C˚. 
  • Insulate all kinds of pipe, tubes, Vessels, Valves, and hose. 
  • Tremendous cost savings
  • You can purchase straps separately to attach the Insulation to the pipe.  We recommend the use of straps, so as to allow the Insulation Snake to be Re-Movable and Re-Usable. 
  • Standard widths are:  6”,12”,18”,24”,36”,48”,60”,72”,84” and 96”. 
  • Standards lengths are: 6’,12’,20’ and 40’ . 
  • You can purchase any combination of widths and lengths, or we can do a custom size.  

Part Number assistance.  You will notice that there are four (4) digits to each part number

The first two numbers indicate the width of the insulation expressed in inches, while the last digits are the length of the insulation expressed in feet.  Thus a part number like 1220, (our most common product) is 12 inches wide, and 20 feet long.  Since it has no preface to this part number, we understand that it has no straps attached. 

Usage Chart

How much Pipe can an Insulation Snake spiral wrap?
(Prt # 1212) 12” wide x12’ long covers 6’6” pipe, 5’6”of 3” pipe, and 5’ of 4” pipe.
(Prt# 1220) 12” wide by 20’ long covers 12’ of 2” pipe, 10’6” of 3” pipe, and 8’6” of 4 pipe.
(Prt# 1812) 18” wide and 12’ long covers 8’ of 3” pipe, 7’of 4” pipe, & 6’of 5” pipe.
(Prt # 1820) 18” wide and 20 long covers 12’ of 3” pipe, 10’ of 4” pipe, and 8’ of 5” pipe.
(Prt# 2412) 24” wide and 12’ long covers 10’ of 4” pipe, and 8’ of 5” pipe.
(Prt # 2420) 24” wide and 20’ long covers 13” of 4” pipe 9’ of 5” pipe.