General Product Information

OVERVIEW


Insulation Snakes Ltd. manufactures an extensive line of removable, reusable and weatherproof insulation products. Our products are used in the oilfield industry, industrial, agricultural and residential sectors. All of our insulation products are compatible with electrical heat trace.
Insulation Snakes® products are manufactured using Certifiable R-12 insulation except for our Econosnakes® which are R-10 insulation value. Our new Product has a certifiable R-14 rating. We have three levels of product: the “OK”, the “Better” and the “Best”.

Insulation Snakes® safeguards you, our customer, and to ensure that you are receiving the full advertised R-Value, our products comply with the following standards:

Building Code Standards
  •  CAN/ULC S702-1997 (Building Codes)
  •  CSA A101-M1993 and CAN/CGSB-51.11-92
Fire Resistance Codes:
  •  CAN/ULC-S102-1998 (Smoke and Flames Codes)
  •  CAN4-114-1980 (Non-Combustibility Code)
  •  ULC-S129-1995 (Smolder Resistance)
  •  Many manufacturing plants are ISO 9001-2000 and ISO14001:2004 certifiable
Compressibility Standards:
  •  NAIMA 202-96 Standard Rev.2000
The fibreglass manufactures produce a more robust, dense product to withstand compression and allow the material to recover to its designed R-value. In other words, our product is designed to be compressed twice – once by the manufacturer and then once by our assembly department.
 

Insulation Snakes Ltd.  uses an organic, plant based binder with no formaldehyde. The sustainable binder is produced from a rapidly renewable resource.

CertainTeed Products are:
 

  • Green Circle Certified
  • 2011 Energy Star Standards
  • GreenGuard
  • CHPS Member
  • USGBC/CACBC member
  • NAHB-Green Approved Products
  • NAIMA Health and Safety Partnership Program


Thickness recovery of fibreglass insulation deteriorates over time while it is compressed in a roll. That is why Insulation Snakes® states on our product tags a manufactured date. All rolled fibreglass insulation should be installed within 3 years of manufactured date. The tighter fibreglass is rolled the more glass fibres are broken and the more thickness recovery is reduced. We are concerned about maintaining the integrity of the fibreglass fibres.
Insulation Snakes® strives to reduce this type of damage by rolling our products just tight enough to be packaged and shipped.

Insulation Snakes® uses a virgin blend (NOT RECYCLED) 5mil polyethylene exterior sheathing giving it excellent puncture and tear resistance. (There are two exceptions where we use 3mil polyethylene). We do not use thicker polyethylene so as to not damage the integrity of the fibreglass fibres.

We have insisted that our vendor add extra UV protection to the polyethylene during the manufacturing process which increases the life of our products, allowing Insulation Snakes® to be exposed to the weather for extended periods of time.

The polyethylene sheathing will soften when temperatures exceed 202°F (96°C). Our insulation products remain flexible and functional at very cold temperatures.

Insulation Snakes® ships products in blue polyethylene bags which also have extra UV protection added during the manufacturing process, allowing for temporary outside storage. All of these bags have our brand name clearly marked, so as to avoid confusion with any imitators.

Our products utilize a zinc coated, quick release, thumb grip, steel buckle which allows for quick and easy removal and installation even in cold or wet and dirty conditions.

Insulation Snakes® stands behind all of our products. All products are guaranteed against defects in workmanship and material that may have occurred during the manufacturing process.


QUESTIONS & ANSWERS



What is the R-value of Insulation Snakes®?


We have three levels of product: the “OK”, the “better” and the “best”.

1. Our Econo-product (R9-10) with 3ml UV treated Polyethylene. We have a VERY limited product line for this.

2. Our World famous Insulation Snake (Certifiable R-12) with 5 ml. UV treated Polyethylene. A majority of our product is in this line. We go from 6” wide to over 96” wide, and almost any length up to 40 feet. It comes with no straps, or with many straps, depending on the application.

3. Our best product, which is still under evaluation, the “Super Snake” which will have a certifiable R-14 rating with a 5ml UV Treated, Rodent Retardants, Higher Puncture resistance , and a Trademark color which we call Cobra Tan, (This color is not as attractive to Corvus family of birds such as the Crows and Ravens because its not black, like most garbage bags).

How thick is an Insulation Snake®?

The Original Insulation Snakes® is 3.5 inches thick and approximately 2.7 inches thick for Econosnakes®. On the New product, the Super Snake, the thickness is 4.5 inches thick, which has a certifiable R14 rating.

What is the outer shell of an Insulation Snake® made of?

The Original Snake and the New Cobra Tan product has a 5 mil, UV protected polyethylene. The Econo-Snake® only has a 3ml. UV treated Polyethylene.

How long will an Insulation Snake® last?

Some of our customers have had snakes out in use for five or more years, still doing their job!

How much pipe can an Insulation Snake® spiral wrap?

The following list applies to Econosnakes®, Original Insulation Snakes®, and Pro Snakes®. The Sidewinder differs in the fact that it insulates the same linear length as its own linear length.

#1212 covers 6’6” of 2” pipe, 5’6” of 3” pipe and 5’ of 4” pipe
#1220 covers 12’ of 2” pipe, 10’6” of 3” pipe and 8’6” of 4” pipe
#1812 covers 8’ of 3” pipe, 7’ of 4” pipe, and 6’ of 5”pipe
#1820 covers 12’ of 3” pipe, 10’ of 4” pipe and 8’ of 5” pipe
#2412 covers 10’ of 4” pipe, 8’ of 5” pipe
#2420 covers 13’ of 4” pipe, 9’ of 5” pipe

 





Linear coverage will vary depending on the amount of overlap used during the installation, if any. Our estimates on coverage per Insulation Snake® used are only meant as a general “rule of thumb”.

What is the heat rating of Insulation Snakes®?

Insulation Snakes® can withstand temperatures up to 202 degrees Fahrenheit or 96 degrees Celsius. At this temperature, the polyethylene sheathing will begin to soften. Higher temperatures will cause it to melt away from the heat source. There is a Data sheet available on the web site.

What should I use to fasten the snake on the piping or equipment?

SNAKE STRAPS are highly recommended and are available separately from Insulation Snakes®. Snake Straps allow for quick and easy installation and removal without damage to the Insulation Snake®.

Can I use a steamer on Insulation Snakes®?

Do not direct the steam jet directly at the Insulation Snake® as it will quickly cut a hole through the polyethylene sheathing, wetting the interior fibreglass rendering it useless as insulation. A popular choice is to use the Insulation Snakes® Sidewinders which can be quickly opened up to access any spot along the pipe without the inconvenience of unwrapping spiral wrapped snakes.

Can I use Insulation Snakes® for underground insulating?

Yes, our #EUG1220 product (Econo Underground Insulation Snake®) and our #PSEUG1220 (Pro Snake Econo Underground Insulation Snake®) product are specifically designed for underground installation. They are meant to be spirally wrapped around the pipe and hold up to gentle burial after installation.

Can I cut the snake to the length that I require?

It would be best not to because our special seal helps keep moisture and rodents out. Our product has a unique design feature that allows internal air flow, while restricting moisture. Cutting and re-sealing voids this feature.

Can you make a Insulation Snake® to fit my application?

Fax or e-mail a diagram with measurements and we will custom build to suit your particular requirements.
To learn more about wholesale and retail pricing and how to order these products, please contact our order desk to setup a distributor account.


 

  Download Catalogue for More information on our products and sizes available

 
   
       Gazelle Group of Companies Inc. 

   ==========>

  

 +

Canline Pipeline Solutions Ltd.

   

+